Thermino TS

Features

Thermino TS works with external heat sources such as boilers and heat pumps.
Modular and scalable, these PCM thermal batteries can be connected in series or parallel to increase heat storage capacity.

• Flexible orientation with plumbing exits on three sides
• Market-leading 10-year warranty on the PCM and heat exchanger
• Minimal risk of legionella
• No mandatory annual maintenance for the heat battery
• High flow rate mains pressure hot water
• Ultra low heat losses – up to 4x lower than a conventional
  cylinder
• Works with heat pumps and boilers, including gas, oil, and LPG

Dimensions

There are three different models: Thermino 150 TS,
210 TS and 300 TS. They are in litre-equivalent sizes for easy
comparison with traditional hot water cylinders.

How Thermino TS works

Saves space
Thanks to the highly energy dense Plentigrade phase change material, Thermino TS is up to 4x smaller than the hot water cylinder it replaces.

Highly energy-efficient, thanks to lower heat losses
Thermino TS is a highly energy-efficient alternative to indirect vented and unvented hot water cylinders.
Its high-performance vacuum insulation means ultra-low heat losses and reduced energy waste, while the low volume of stored water (<15L) removes the need for additional energy-intensive Legionella protection cycles.

Works with external heat sources, boilers and heat pumps
Thermino TS can work with external heat sources, such as boilers, making it an energy- and space-efficient replacement for indirect hot water cylinders.
It is also compatible with heat pumps, so whether you are upgrading now or planning to in the future, you won’t need to change your thermal store.
Compact and easy to install, it fits into tight spaces with minimal disruption, making it ideal for retrofit or new-build.
The external heat source just needs to meet the requirements set out in the Thermino TS manual.